This brilliant and exquisite water-cooled Threadripper gaming PC is much from delicate, going straight to your eyes with its high-contrast, Day-Glo shade scheme. Taking inspiration from the Asiimov weapon skins in Counter-Strike 2, PC modder Devin Waddell (aka TekRedMods) constructed this beautiful orange and white PC with an electrical energy theme, which he appropriately calls ReVolt.
Due to our quickly rising PC constructing Fb web page, we’ve seen many customized gaming PCs, from mods based mostly on present case designs to scratch PC builds. You possibly can even submit yours for consideration proper right here. Right here Devin guides us by way of the creation of this placing orange and white PC construct.
Devin: ReVolt began life as a rebuild of a previous mission known as Inkling. Inkling was themed on the online game sequence, Splatoon, so it was painted with a pink and inexperienced splatter-paint job. Sadly, a number of months into utilizing Inkling, my monitor shut off in the course of a sport; I regarded down and observed coolant on my Asus ROG Strix GeForce GTX 1080 graphics card. I instantly switched off the PC and eliminated the graphics card to scrub it, but it surely was too late, the cardboard was useless.
The offender was the 12mm PETG tubing that I initially used for the water-cooling loop. It was thin-walled and had buckled across the fittings, inflicting it to lose its seal. I contacted Bitspower about this subject, and the corporate despatched alternative components, however this time round I opted for acrylic tubing, as it may be higher at dealing with the warmth required for bending. I additionally went with 16mm tubing to assist guarantee a sturdy construct.
Initially, I used to be going to simply rebuild Inkling, as I actually favored the colour scheme, however as weeks was months, I used to be getting annoyed with the construct. The unique case was broken, and plenty of different small points saved cropping up, so I made a decision to tear it aside fully and begin over.
Revolting
I made a decision to name this new mission ReVolt, not as a result of I used to be feeling notably rebellious on the time however as a result of I used to be giving new life to an previous PC, and PCs use electrical energy. Volts, ReVolt. I’m certain you see the place I used to be going with it. Since I used to be doing a totally new construct, I wanted a brand new case and a brand new shade scheme, so I opted for the InWin 303C case, because it’s a modern chassis with easy rectangular strains that make for a perfect start line for modding.
As for the colour scheme, one in every of my favourite video games is Counter-Strike: International Offensive (now Counter-Strike 2), and I actually love the Asiimov weapon skins in that sport. Nevertheless, I had already seen an Asiimov-themed construct, so didn’t wish to copy the look instantly. As such, I made a decision to maintain the primary white, orange, and black shade scheme, however I solely used the black for highlights and didn’t add any of the weathering and battle-scarring results seen on the weapons.
Though I used to be planning on performing some mild gaming on this PC, its major function was for graphic design work, as that’s my main at school. As such, I opted for an AMD Ryzen Threadripper CPU for its excessive multi-threaded efficiency, mixed with an Asus ROG Zenith Excessive motherboard.
Soar begin
I began this mission by slicing out the entrance window of the case. I masked off the realm, each inside and outside, then fastidiously measured and drew my desired window design. Utilizing an angle grinder, I then minimize alongside simply inside these strains, leaving sufficient materials to make sure that, if I minimize an excessive amount of, I might nonetheless repair it throughout sanding.
As soon as the window was minimize out, I used the angle grinder with a sanding disk to scrub the sides. After that I used a file to additional finesse both sides, ensuring they had been completely straight. Lastly, I wet-sanded all the sides with 320-grit sandpaper to get them fully clean. A fast coat of matt white paint and the window was completed.
Some of the troublesome components of the construct was customizing the InWin Polaris followers. I made a decision to strive one thing I hadn’t seen earlier than, which was to vertically mount 4 followers within the prime of the case. To do that with out making any main modifications to the case, I made a few brackets from small C channel, which I drilled and tapped with holes for the followers, and to mount the meeting to the again of the chassis.
The following activity was portray the followers, and I needed the rings of the fan mounts to be orange, whereas the remainder of the followers had been black and white. This job required taking the followers aside, which was trickier than traditional as a result of there have been so many components.
Not like most followers that solely have the blade and physique, these followers had the body, outer ring, and blades. To take away the blades, there was a retention ring that wanted to be taken off first, then I wanted to separate the ring from the body, which was held on by 4 screws. It was a fiddly job, as was masking off all of the components for portray.
As soon as the followers had been completed, I then determined the again wall subsequent to the motherboard wanted to be cleaned up, and an acrylic cowl appeared just like the pure alternative. I minimize the acrylic utilizing my scoring software, which I take advantage of on virtually each mission on which I work.
If used accurately, it offers you completely straight cuts that solely want a bit sanding afterward. I then used my warmth gun to warmth the sheet of acrylic and thoroughly bend it to form. There have been two bends fairly shut collectively, so it was quite troublesome with out a correct acrylic bending software, however I obtained there ultimately.
An acrylic cowl additionally appeared like the most suitable choice for tidying up the open facet of the case, subsequent to the reservoir. I wasn’t certain what form to make use of, so I simply obtained out some scrap acrylic, put it within the case, and began enjoying round till I got here up with a design with which I used to be blissful. Nevertheless, whereas I favored the form, it nonetheless didn’t fairly have that sure one thing, so I made a decision to chop out smaller items to go on prime and add extra texture and curiosity. I minimize out all of the items by hand with a drill and scoring knife, as I didn’t have a scroll noticed.
Subsequent got here portray and, retaining with the orange and white styling, I made a decision to paint the bottom orange and the highest items white, giving the impact of an orange define. Nevertheless, wanting in from the entrance, I didn’t like how the orange panel regarded, so I minimize out one other piece of acrylic to sit down behind it, offering a sharper white edge to the entire part. All these white panels not solely created the general look I used to be after, but in addition offered a handy place to place my sponsor logos, which I made utilizing my vinyl cutter.
The cables used on this construct I made myself. I have sleeved non-modular PSU cables earlier than, however this was my first time making a customized set for a modular PSU – the PSU I used is an EVGA SuperNOVA 850 G+. I discovered it quite troublesome and time-consuming, as I first needed to create a pin-out of all of the cables. I then wanted to determine the lengths for every cable.
After finishing the cables, I needed to minimize out a passthrough for them within the acrylic cowl I made for the again wall. After becoming them, I made a decision to color the acrylic as if the cables had been a part of the panel, with orange and black stripes persevering with on from the cables.
Lastly, I made a decision to repaint the DDC pump and radiator that was used beforehand in my Inkling mission. Since there was a sample of strains all through the construct, I attempted to recreate that sample within the pump and radiator as nicely.
Lighting strikes
In any case this gear was painted and assembled, subsequent got here the enjoyable half: tube bending. I feel I obtained by way of round 10m of tubing looking for the appropriate structure and look, and it took me round 4 days to finish. Nevertheless, I obtained there ultimately and was more than happy with the outcomes, till I crammed it up.
It wasn’t a disastrous leak that was the issue this time, however the alternative of coolant shade. I’d used Bitspower orange dye with Mayhems white focus and the resultant orange juice impact wasn’t to my liking. So, I scratched that concept, and drained and flushed the system. By this level, I’d additionally determined I nonetheless didn’t just like the tubing runs, so out they got here once more, and it was again to the drafting board.
After a lot staring and considering – warmth gun in hand – it lastly got here to me: why not mirror the identical angles utilized in the remainder of the construct’s design within the tubing? It took a substantial quantity of additional effort to realize all of the exact angles, with the sharp 45-degree flip above the graphics card being notably tough, however I’m actually pleased with the outcomes. As soon as the tubing runs had been completed, I crammed up the system to leak-test it and simply cherished the way in which it regarded with crystal-clear coolant. So, as a substitute of risking one other orange juice catastrophe, I left the coolant clear.
After the construct was completed, my spouse stated the plain white case regarded a bit boring and wanted extra of a paint job and, as at all times, she was proper. The ultimate flourish, then, was so as to add the orange strains and a brand I designed for the system to the surface of the case. Including the sponsor logos on the underside additionally helped to fill out the big expanse of white.
I‘m very pleased with the way in which this mission turned out. I really like the angles and the colour scheme, and ReVolt continues to be my private rig to today. I’d prefer to have had all of it professionally painted, however I merely didn’t find the money for it on the time. It additionally would have been good to have the instruments to chop and bend acrylic extra simply.
I had quite a lot of first rate instruments within the USA however, after shifting to Japan, I‘m having to start out my software assortment over once more from scratch. A scroll noticed is my newest buy, and I’m wanting ahead to utilizing it on many future tasks.
ReVolt Threadripper gaming PC specs
- CPU: AMD Ryzen Threadripper 1950X
- Reminiscence: 32GB TeamGroup T-Power Nighthawk 3000MHz
- Graphics card: Asus ROG Strix GeForce GTX 1080
- Motherboard: Asus ROG Zenith Excessive
- Case: InWin 303C
- Energy provide: EVGA SuperNOVA 850 G+
We love the excessive distinction of brilliant orange towards white on this construct, and the hand-sleeved cables look unbelievable, as does the hardline water-cooling system. You possibly can take a look at extra of Devin’s nice PC modding work on Instagram and builds.gg. In the event you’re new to the world of water-cooling and wish to have go your self, then be sure you additionally learn our full information on learn how to water-cool your PC.
This publish initially appeared on Customized PC, which has been protecting wonderful setups for over 20 years and is now a part of . Be a part of our practically 500k member Fb group to debate this construct.
In the event you take into account your self to be an knowledgeable PC builder, you’ll be able to submit your personal customized PC construct to us at this time for an opportunity of being featured on sooner or later.
