We love seeing a masterfully painted PC case at , and this brightly coloured Cyberpunk 2077 gaming PC reveals some intelligent use of spray paints by PC modder Richard Ord. Not solely that, nevertheless it additionally options customized particulars made with a 3D printer and an incredible exhausting tube water-cooling system. Richard calls this construct Cyberpunk 2077 Neon, and it’s based mostly on an Antex DF600 Flux case.
Due to our quickly rising PC constructing Fb web page, we’ve seen many customized gaming PCs, from mods based mostly on present case designs to scratch PC builds. You possibly can even submit yours for consideration proper right here. Now let’s speak to Richard about how he made this beautiful Cyberpunk 2077 construct.
: What impressed you to construct a PC based mostly on Cyberpunk 2077?
Richard: This challenge all began when Antec reached out to me to do a construct within the firm’s new DF600 Flux case. After I acquired the case, I had simply been binge-watching a number of trailers for Cyberpunk 2077, and thought I might take a few of these facets I’d seen and incorporate them into the construct.
Take us via the portray course of.
I needed to strip the total case proper down with a purpose to paint all of it. I knew from watching the trailers that I wished to make use of blue, yellow, and pink, though I wasn’t 100% certain if it could work in apply. I usually use spray cans at any time when I do any portray, however this time I wished to strive Kobra paint, because it doesn’t require a number of prep work – you simply want to ensure the panel is clear.
How did you make the 3D Cyberpunk 2077 brand on the PSU shroud?
I’m all the time taking a look at know-how to seek out new methods to mod, and I invested in a Prusa i3 MK3S 3D printer in the beginning of the 12 months – I’ve used it for a couple of builds now and it’s an incredible software. For the brand, I had a glance and located a brand that I preferred. I then went into Fusion 360 and edited the file to suit the realm I wished, after which sliced the file to run on my 3D printer.
There’s a brand on the graphics card backplate too. How did you make that one?
After I did the backplate for the graphics card, I went again into Fusion 360, and edited the file I used for the 3D printer to a DXF file, so I might minimize out the design in vinyl on my plotter. As soon as I’d minimize out the brand, I positioned it on the bottom of the graphics card backplate and caught it down, ensuring there have been no air bubbles.
As soon as all of the bubbles had been squeezed out – I utilized the primary layer of yellow spray paint, which I then repeated a couple of occasions to get a good coat. As soon as it was dry, I simply peeled off the vinyl and repeated the method with the blue paint.
Who made the distribution plate on the entrance?
The distribution plate on this construct was made by Bitspower, however I additionally make customized ones.
What kind of exhausting tubing did you utilize?
I used EK’s 16mm PETG tubing, and there aren’t any wild bends in it – I saved it easy with 90-degree bends.
Is {that a} Lian Li Strimer set on the facility cables?
Sure it’s – I assumed it could look good on this colourful construct.
There’s barely a cable in sight. How did you intend the cable routing, and is it as tidy on the again?
It was very simple on this case – there’s a number of area on the again and it even had a built-in fan and RGB hub.
Is the cooling system geared extra in the direction of cooling energy or quiet operation?
I’ve slowed down the followers, so it’s a really quiet system – I haven’t tried to overclock the CPU but. To be sincere, with this construct, I used to be additionally stunned by how a lot airflow the case produced.
How did you intend the lighting coordination, and the place are all of the lights?
For this construct, all the sunshine comes from the case followers, motherboard, graphics card waterblock and distribution plate.
Did you need to carry out any customized modifications to the case, apart from the paint job?
To be sincere, no – I wished to maintain the case as near its inventory configuration as attainable.
Did you come throughout any difficulties with this construct?
As soon as I’d fitted all of the {hardware} within the case, I hit a couple of points with the size of the MSI GeForce RTX 2080 Gaming X Trio graphics card. I knew I didn’t have a number of area on the precise of the case, and that’s after I realized I wanted to make use of a distribution plate in that location.
It could give me the look I wished to attain, with the tubing operating from proper to left, and it could match. Becoming the distribution plate wasn’t simple both – I needed to make a couple of customized brackets and spacers – that is the place having a 3D printer is available in very useful.
How lengthy did it take you to finish this construct, from begin to end?
I wished to have a fast turnaround with this construct, so it took round two weeks, with me doing a couple of bits every evening round my household and my day job.
Have you ever received any ideas for people who find themselves involved in constructing a system with a customized paint job?
The perfect tip I may give you for doing customized paintwork is to be sure to put together the realm nicely for the kind of paint you’re utilizing.
Are you utterly proud of the tip consequence, or do you want you’d performed a few of it in another way looking back?
That’s a superb query. After I first accomplished this construct I used to be very proud of what I’d produced, and I additionally acquired a number of excellent suggestions. Nevertheless, anybody who is aware of me nicely will know that I all the time wish to tinker with my builds, so I might be stunned if I don’t find yourself altering one thing about it later.
Lastly, I’d additionally like to only say an enormous thanks to the entire sponsors for this construct – Intel, Antec, MSI, Bitspower, and Seagate.
Cyberpunk 2077 Neon PC construct specs
- CPU: Intel Core i9-10900KF
- Case: Antec DF600 Flux
- GPU: MSI RTX 2080 Gaming X Trio
- Storage: 1TB Seagate Firecuda M.2 SSD
- Reminiscence: 32GB G.Ability Trident Z Neo
- Motherboard: MSI MPG Z490 Gaming Carbon WiFi
- PSU: Antec HCG 650W
- Cooling: Customized water-cooling loop with elements made by Bitspower
We love the colours on this construct Richard, and the customized particulars on the GPU backplates and PSU shroud look sensible – unbelievable work! If this PC tickled your style buds, then you definately’ll additionally need to check out this different Cyberpunk 2077 PC, which has some nice etching work on the panels. In case you’re new to the world of water-cooling and wish to have go your self, then be sure to additionally learn our full information on find out how to water-cool your PC.
If you wish to see extra excellent customized PCs, take a look at our finest PC builds function, and when you’ve constructed a unprecedented PC of any description your self, then we’d like to see it! Be part of our Fb group when you’d wish to submit your personal work for consideration.
