A PC case inside can shortly get cluttered and messy when you begin including water-cooling gear and a number of graphics playing cards, however reader Peter Morey has proven which you could nonetheless make an intricate gaming PC construct look actually clear. It’s based mostly on a Thermaltake The Tower 900 case and options two water-cooling loops.
Due to our quickly rising PC constructing Fb web page, we’ve seen many customized gaming PCs, from mods based mostly on present case designs to scratch PC builds. You may even submit yours for consideration proper right here. Right here we chat to Etienne about how they assembled and designed this SFF PC construct.
: Let’s begin with the preliminary inspiration. What made you need to construct your machine?
Pete: I’ve beloved PCs since I used to be a young person, but it surely actually took root round 4 years in the past, which is after I lastly constructed my first PC utilizing all new components. I’ve had the bug ever since!
What design options did you need to incorporate into your construct, and the way did you go about implementing them?
The most important design characteristic needs to be the cooling loop. I needed one thing that was trendy however not too ‘in your face’ and remained purposeful. That’s why I went with smaller-diameter tubing and tried to maintain it clear and never too sophisticated. I imagine I’ve achieved this.
What timescale was concerned, and what challenges did you discover in placing it collectively?
I began this undertaking round 18 months in the past. The primary problem was the truth that I simply saved including extra, so the construct saved altering. I went by three instances till I settled on this one, a Thermaltake The Tower 900. I saved needing more room as my cooling loop grew.
Take us by the supplies you used for the cooling. What was concerned in planning, measuring, reducing, and bending all of it to form?
I made a decision to go together with EK Water Blocks for the blocks, fittings, pumps and radiators, utilizing a 360mm SE radiator in push config for the CPU, and a 360mm XE radiator in push-pull config for the GPUs. I additionally tried hardline PETG tubing, as I like the look. I had delicate tubing within the first two instances however needed to step it up for this model. I did the cuts and bends by eye, used a warmth gun and shockingly didn’t make any errors!
Take us by the lighting. What impact have been you in search of and the way did you obtain it?
I went with Corsair for the lighting, which incorporates two ML 140mm RGB followers and a few of Corsair’s RGB lighting strips related to a Corsair Commander Professional. The GPU blocks and reservoirs even have RGB, which is managed by the motherboard.
Is there something hidden in there that we will’t see?
Behind the case I’ve managed to cover two radiators, 11 120mm followers, Corsair Commander Professional and lighting nodes, stream indicators and drain faucets. There are additionally 4 2TB onerous disks in RAID for storage. I feel my largest brainwave was to color the SSDs and varied components of the case white. It was very gloomy inside earlier than and I feel it breaks it up properly.
What was the trickiest a part of the construct?
The toughest half for me was determining the water-cooling loops. It took some time to determine on the order and routing. Total, this case was superb to construct in, making it very straightforward for probably the most half because of the sheer measurement of it! Though wiring within the fan controller was a ache, as there wasn’t a lot room within the decrease half as soon as I’d put all the remainder in. I ought to have fitted it first, however oh nicely.
Tower 900 water-cooled PC specs
- CPU: AMD Ryzen 7 2700X operating at 4.2GHz on all cores
- GPU: 2 x Gigabyte Aorus GeForce GTX 1080 Ti 11G Xtreme Version
- Case: Thermaltake The Tower 900
- Storage: Samsung 970 Evo 500GB SSD, 2 x Essential MX500 SSD, 4x WD 2TB onerous drives in RAID config
- Reminiscence: 2 x 8GB Corsair Vengeance 3200MHz
- Motherboard: Asus ROG Crosshair VII Hero
- PSU: Corsair HX1000
- Cooling: EKWB CPU waterblock, 2 x EKWB GPU waterblock, 2 x EKWB EK-XRES pump res combo, EKWB 360SE radiator, EKWB 360XE radiator, 9 x EKWB Vadar followers, EKWB fittings and PTG tubing
We’re actually impressed by the tidiness of this construct, and the 2 reservoirs on the entrance present some great-looking symmetry. We additionally at all times take our hats off to anybody who cuts and bends their very own tubing for hardline water-cooling techniques. It is a gorgeous construct by Pete. In case you’re new to the world of water-cooling and need to have go your self, then ensure you additionally learn our full information on water-cool your PC.
This submit initially appeared on Customized PC, which has been masking superb setups for over 20 years and is now a part of . Be a part of our 500k member Fb group to debate this construct.
In case you take into account your self to be an knowledgeable PC builder, you’ll be able to submit your personal customized PC construct to us immediately for an opportunity of being featured on sooner or later.
