Taking inspiration from the primary Tim Burton Batman movie, PC builder Stephen Wells constructed this water-cooled Joker gaming PC, which fits all out on a purple and inexperienced colour scheme. There’s inexperienced coolant within the water-cooling system, customized purple and inexperienced PSU cables, and a few inexperienced Joker fan grilles based mostly on Jack Nicholson’s grin.
Because of our quickly rising PC constructing Fb web page, we’ve seen many customized gaming PCs, from mods based mostly on current case designs to scratch PC builds. You’ll be able to even submit yours for consideration proper right here. Now let’s discuss to Stephen about how he made this Joker PC construct.
: How did this venture begin? What impressed you to construct a Joker-themed PC mod?
Stephen: As a giant film fan, Tim Burton’s 1989 model of Batman was a giant inspiration. I’ve additionally seen equally themed builds, and I preferred the colour mixture.
Why did you select to base it on the Lian Li 011 Dynamic case, and the way did you discover working with it?
I selected this case as a result of it had nice critiques in relation to cooling and airflow. It additionally has glass on each the entrance and facet, which permits extra of the construct to be seen. Throughout the construct, I had points with the position of the D5 pump because of the inside area within the case. I solved this downside by mounting the pump in the back of the case, above the graphics card.
Did you carry out any customized modifications to the case?
I modified the case by including a Joker vinyl sticker to the entrance in inexperienced and purple colours. This sticker was equipped by Kasim Malik of Gorilla Gaming, which is a part of Pc Orbit.
What’s on the opposite facet of the motherboard tray?
Not very a lot in all honesty – simply extraordinarily neat cable administration, the ability provide and a 2TB onerous disk. I additionally added a Joker determine beneath one of many radiators so as to add extra character to the construct.
How did you go about designing and making the customized fan grilles on the entrance radiator?
As soon as once more, I used Kasim. I contacted him on Fb and defined my concept and what I used to be in search of. He then got here again to me with a number of choices. I selected the design that I believed would work finest with the theme and lighting.
The place did you get that shiny inexperienced coolant from?
The coolant is CFX Vivid Inexperienced, which I purchased from Amazon. Throughout the construct, I used to be undecided whether or not to make use of the ultimate colour mixture you’ll be able to see right here, or to go for the CFX Purple Violet coolant with inexperienced lighting as a substitute. I went with the inexperienced, because it’s extra vivid than the purple and actually provides to the wow issue.
How did you obtain that inside purple sheen? Is all of it right down to lighting, or is among the inside painted?
The purple sheen was created with the Corsair LL120 RGB followers and the 4 Corsair RGB lighting strips. I used Corsair’s iCUE software program to pick the colour for the followers and strips, in addition to the Corsair Dominator Platinum RAM lights, which glow in a inexperienced and purple sample.
This is the reason I selected to make use of this specific RAM, and never the Corsair Vengeance RGB Professional, as I used to be in a position to choose the colour for every particular person sq.. The vivid inexperienced coolant then contrasts with the purple lighting to essentially carry the colours to life.
We love the way in which the ability provide cables change colour on both facet of the cable comb. How did you do that?
The facility provide cables had been made by TTW Mods, which I discovered on Fb. This agency supplied me with cables that completely matched the colours of my theme, and which additionally stored my construct wanting tidy {and professional}.
What materials is the tubing comprised of, and the way did you go about planning the tubing routes and bodily making the bends?
I used clear PETG onerous tubing for this construct, and I made the bends utilizing a warmth gun and a rubber insert. I used a pipe cutter
to make sure the cuts had been clear. The route was deliberate as I went alongside, with numerous modifications needing to be made earlier than I arrived on the finish outcome.
Take us via the parts of the water-cooling loop.
For the water-cooling loop, I used two radiators, with an Aqua Pc D5 pump. I used chrome fittings to match the EK waterblock after which used black LL120 followers to match the black on the EK radiators. There’s additionally a circulate indicator below the graphics card, and a Barrow RGB Waterway Distribution Panel Reservoir on the entrance of the case.
Did you come throughout any difficulties?
The best problem was utilizing up all of the reservoirs on the distribution plate on the entrance, because the picture of the distribution tank on-line when buying it was completely different to the one I obtained. Due to this distinction, I needed to change the water-cooling loop, though it really turned out brilliantly ultimately.
Constructing the water-cooling loop itself was an enormous problem as nicely. Making an attempt to bend the tubing with out creating any bubbles or creases, and determining the place to position the drainage valve, had been among the many many difficulties I confronted throughout this a part of the construct.
How lengthy did it take you to finish this construct, from begin to end?
It took about 5 weeks on and off to finish the construct, together with the planning and analysis. I additionally took my time to make sure that each a part of it was excellent.
Are you utterly proud of the top outcome, or do you would like you’d carried out a few of it in a different way on reflection?
I used to be over the moon with each the looks and the efficiency of the construct – I’m very happy with it. Simply out of curiosity, I want to have seen how it might have turned out if I’d used the choice colour scheme, with purple coolant, purple fan grilles, and inexperienced lighting. Perhaps that’s a venture for the longer term!
Joker gaming PC specs
- CPU: Intel Core i9-9900K overclocked to 5GHz
- GPU: MSI GeForce RTX 2080 Sea Hawk EK
- Case: Lian Li 011 Dynamic, with Lian Li PCIe riser cable
- Storage: Samsung 970 Professional 512GB, Intel Optane Reminiscence 32GB, 2TB WD onerous disk
- Reminiscence: 32GB (4 x 8GB) Corsair 3200MHz Dominator Platinum RGB
- Motherboard: Asus Z390 ROG Maximus XI Formulation
- PSU: EVGA SuperNOVA 750 G2
- Cooling: EK-Velocity D-RGB CPU waterblock, 2 x EK-CoolStream SE 240 Radiators, Barrow Waterway Distribution Panel Reservoir, Aqua Pc D5 Subsequent RGB pump, Aqua Pc D5 ULTITOP pump adaptor, Alphacool Eiszapfen 13 mm chrome onerous tube compression fittings, Alphacool Eiszapfen circulate indicator, 4 x Corsair LL120 RGB followers
We love what Stephen has carried out with this Joker PC construct, and never simply because we’re sufficiently old to recollect the primary Tim Burton Batman film in 1989. The customized particulars, such because the fan grilles and decals, actually make it stand out, and the inexperienced coolant and hard-tube water-cooling system look sensible. In case you’re new to the world of water-cooling and need to have go your self, then be sure you additionally learn our full information on water-cool your PC.
This put up initially appeared on Customized PC, which has been overlaying wonderful setups for over 20 years and is now a part of . Be a part of our 500k member Fb group to debate this construct.
In case you take into account your self to be an knowledgeable PC builder, you’ll be able to submit your individual customized PC construct to us immediately for an opportunity of being featured on sooner or later.
