Whereas a water-cooled rig with multi-colored RGB lighting can look the enterprise, you possibly can nonetheless make a daring assertion with an understated air-cooled PC. This white gaming PC construct by Paul Turton is a living proof, with a clear and tidy inside, and a hanging angled graphics card dominating the middle.
Due to our quickly rising PC constructing Fb web page, we’ve seen many customized gaming PCs, from mods primarily based on current case designs to scratch PC builds. You’ll be able to even submit yours for consideration proper right here. Now let’s speak to Paul about how he made this air-cooled white PC construct.
: What made you need to construct a PC with an all-white inside?
Paul: I’ve all the time favored white builds. Not many individuals do them, as there’s an absence of pure white components. Many of the white circumstances that get launched are likely to have a black inside, however the SilverStone RL07 was pure white, so it began there.
Do you favor air cooling to water cooling?
I like air-cooled programs. I construct a number of water-cooled programs for patrons, and have loads of pals in the neighborhood who all do the identical factor – they’re superb programs. I simply have a delicate spot for foolish huge air coolers. I’ve performed loads of air-cooled builds so far, utilizing coolers from Noctua, Cryorig, be quiet!, and some extra.
So far as I’m involved, the smaller the higher – attempting to cram a Noctua NH-D15 right into a mini-ITX construct is simply enjoyable to me.
It appears like maintaining the inside minimal is a giant precedence for you, and that’s some superb cable-tidying work. Take us by way of the method of making such a clear inside.
Planning a construct doesn’t actually take lengthy as soon as all of the components are there. I can often see the place the cables will go fairly shortly, and the place I’ll must make mods to make the cable tidying somewhat cleaner. It was very easy to work with this case – all of the grommets had been in the appropriate locations, and I didn’t actually have to fret about PCIe energy cables due to the way in which the graphics card is mounted – there’s a grommet instantly behind it.
Did you make the angled graphics card mount your self?
The graphics card mount was an concept I’d seen some time again on one other system, and I wished to attempt it out. There’s no benefit to positioning it like that; it’s simply completely different to having it mounted within the conventional approach or with a vertical bracket. The mount is made out of simply a few coat hangers from B&Q, which I bent to form. I then drilled the mounting holes within the PSU shroud, added a few bolts and bingo! It’s simply held in place by heavy-duty Velcro.
How do you entry the graphics card’s outputs at that angle?
Because the system sits in the meanwhile, the HDMI cable simply passes by way of the rear of the case the place the PCIe growth slot screws are positioned. Nonetheless, I’m getting wi-fi HDMI, which can take away the necessity for a cable altogether. If that doesn’t work out, then I’ll get an extension cable and run it down into the PSU shroud.
A few of these elements, such because the Strix graphics card cooler, don’t have white components on them by default. How did you paint them?
With white PlastiKote paint. I stripped down the graphics card, then pulled off sections of the Strix shroud with a knife – they’re solely held in place by glue, so it’s pretty straightforward. Then I painted these sections – it solely takes just a few mild layers to get good protection. I then glued all of the bits again into place.
I used to be going to color the entire shroud white, however I assumed it seemed higher with the top outcome I obtained. The SilverStone fan blades had been additionally initially blue, however I painted them white.
How lengthy did it take you to finish this construct?
Not too lengthy actually – round three hours, and most of that point was spent sleeving cables and making the graphics card mount. It’s a reasonably easy construct.
Did you come throughout any difficulties? In that case, how did you resolve them?
I used to be initially going to make use of a Thermaltake Frio Excessive cooler, which is one other dual-tower cooler, however it’s 140mm tall. The paint didn’t go to plan on that one although – I believe it has a coating on the cooler from the manufacturing facility, so the paint didn’t stick. The graphics card mount additionally clashed with that cooler, so I swapped it out in the long run.
Are you utterly proud of the top outcome, or do you want you’d performed a few of it in a different way looking back?
The one half I’m probably not too pleased about is the graphics card. I wished to make use of one of many Galax Corridor of Fame playing cards, however once I was in search of components, they had been both actually overpriced or simply tough to search out.
Air-cooled white PC construct specs
- CPU: Intel Core i5-6600K overclocked to 4.8GHz
- GPU: Asus ROG Strix Radeon RX 480, with BIOS flash to RX 580 specs
- Storage: 2 x 250GB Samsung SATA SSDs in RAID 0
- Reminiscence: 8GB 3200MHz Essential Ballistix
- Motherboard: Asus Z170 Mark S Sabertooth
- PSU: EVGA 750W G2i
- Cooling: DeepCool Neptwin CPU cooler, 4 x SilverStone SST-FQ121 120mm followers painted pure white
We actually just like the subtlety of this construct, and Paul has proven that you just don’t must spend a great deal of cash on proprietary case equipment both – a few coathangers, a drill and a few Velcro could make a nice-looking angled graphics card mount.
This publish initially appeared on Customized PC, which has been overlaying superb setups for over 20 years and is now a part of . Be a part of our almost 500k member Fb group to debate this construct.
In case you contemplate your self to be an knowledgeable PC builder, you possibly can submit your individual customized PC construct to us immediately for an opportunity of being featured on sooner or later.
